TotalVPN - Apple TV     Total VPN

Knowledge Base

Apple TV

Apple TV 2 & 3

  1. In a browser, visit the Smart DNS page and whitelist your Apple TV IP address. (IP address is found in Settings > General)
  2. Then, on the Apple TV, still in Settings > General, select the connection type you use (either Wi-Fi or Ethernet)
  3. Scroll down to Configure DNS and select Manual
  4. Enter the DNS address which appears on the Smart DNS page, Select Done once entered
  5. Restart the Apple TV by either unplugging from power, or by returning to the General menu and selecting Restart

Apple TV 4

  1. In a browser, visit the Smart DNS page and whitelist your Apple TV IP address. (IP address is found in Settings > Network)
     
  2. Then, on the Apple TV, still in Settings > Network, select the connection type you use (either Wi-Fi or Ethernet)
     
  3. Scroll down to Configure DNS and select Manual
     
  4. Enter the DNS address which appears on the Smart DNS page, Select Done once entered
     
  5. Restart the Apple TV by going back to Settings and select Sleep Now
     
  6. Unplug the Apple TV power cord, wait 15 seconds, then plug it back in

After setting up TotalVPN DNS on your device, and rebooting, you will then be fully configured to begin using SmartDNS services.​

Was this article helpful?

YES NO